Arrives by Thu, Feb 1 Buy TFCFL Adhesive Dispenser Hot Melt Glue Gluing Dispensing Machine X001 3KG/HR 900W at
Hot melt glue dispensers are widely used in: toys (bonding, fixing, wiring, insulation), sealing. Packaging; handbags skin bags; small appliances. Wires. Connectors. Connectors; audio. Photo frame: identification labels; Small paper products are bonded and fixed; small ornaments, crafts, hairpins, water polo, etc.; electronic products are fixed. Adhesive. Insulation; other manual or semi-automatic use of glue is required.
Features:
Model: X001
Power: 900W
Sol speed: 3KG/HR
Solvent capacity: 3KG/HR
Maximum viscosity; 10000 CPS
Working temperature: 160-180 degrees centigrade
Temperature control range: 0-300 degrees centigrade
safety precaution:
Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive
1. The gas circuit should avoid too much water vapor entering
2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.
3.The maximum total air pressure is set to 4KG
4. Before heating the melted glue, the pressure of the storage bucket must be released first.
Preparation for operation
1. Confirm the safety protection measures
2. Check if the machine is 110VAC and there is no fluctuation in the pressure
3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)
5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.
6. Check if the air supply system is basically dry and the air pressure is stable
7. Power on and test the circuit of each part.
Boot steps
1. Connect the power and turn the power switch to ON
2. Check if the temperature of the temperature controller is within the above range
3. Check whether the pressure relief is turned in the direction of pressure holding
4. Connect the origin, set the pressure value, and start the operation
Shutdown steps
1. Release the foot switch to cut off the main power
2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0
NOTE:The product needs to be used with an air compressor
Hot Melt Glue Systems, Tanks, & Dispensing Equipment
Dispensing Equipment - Epoxy and Adhesive Supplies - Products
Cordless Fast Preheating Hot Glue Gun Kit with 30PCS Glue Sticks (7mmx150mm), USB Rechargeable & Smart Power-Off Cordless Hot Melt Glue Gun for Quick Repairs, DIY & Xmas : Tools
900W Hot Melt Glue Spraying Gluing Machine Adhesive Injecting Dispenser Equipment : Tools & Home Improvement
Hot Melt Glue Systems, Tanks, & Dispensing Equipment
Benchtop Dispensing Robot For Hot Melt Adhesive Glue-TianHao Dispensing Robot
Dispensing Machine for Glue, Adhesive, Solder Paste, Silicone and more!
Using Less Money On Glue Machine To Start Your Business, 53% OFF
Fetcoi Commercial Hot Melt Glue Spray Injecting Machine, 900W Semi-automatic Adhesive Hot Glue Gun Dispenser Equipment for Industries, 10000 CPS : Tools & Home Improvement
Hot melt glue dispensers are widely used in: toys (bonding, fixing, wiring, insulation), sealing. Packaging; handbags skin bags; small appliances.
TFCFL Adhesive Dispenser Hot Melt Glue Gluing Dispensing Machine X001 3KG/HR 900W
Fetcoi Commercial Hot Melt Glue Spray Injecting Machine, 900W Semi-automatic Adhesive Hot Glue Gun Dispenser Equipment for Industries, 10000 CPS : Tools & Home Improvement
How to use TBK-983B Automatic Glue Dispenser Machine?
Resin Dispensing Machine, TBVECHI Semi-auto Digital Glue Dispenser AB Glue Epoxy Resin Dispensing Machine Foot Pedal Control : Tools & Home Improvement